Welcome to visit Miaozhen!
Current location:front page >> mechanical

Why is the air conditioner so loud?

2025-11-29 05:49:26 mechanical

Why is the air conditioner so loud?

Recently, as the high temperature in summer continues, the frequency of air conditioner use has increased sharply. Many users have reported that the air conditioner makes too much noise when running, which affects the quality of life. This article will combine the hot topics and user feedback from the entire Internet in the past 10 days to analyze the common causes and solutions of excessive air conditioner noise, and provide structured data for reference.

1. Common causes of excessive air conditioner noise

Why is the air conditioner so loud?

Cause classificationSpecific performanceProportion (user feedback)
Installation issuesThe bracket is loose and the outdoor unit is tilted32%
mechanical failureFan blade deformation and compressor aging28%
Filter cloggedReduced air volume causes motor overload18%
Refrigerant issuesLeakage or excessive noise12%
other reasonsVoltage instability and product design defects10%

2. Recent hot topics

platformHot search keywordsNumber of discussions (times)
Weibo#Air conditioning noise nuisance to the people#456,000
Douyin"A Guide to Avoiding Pitfalls in Air Conditioning Maintenance"321,000
Zhihu"How to solve the low-frequency noise of air conditioners?"128,000

3. Solution comparison table

Question typeDIY solutionRequires professional operation
Installation is looseTighten the screws and adjust the levelWorking at heights requires a professional team
Filter cloggedClean once a monthNo need
Abnormal noise from compressorCannot handle by yourselfNeed to replace parts or overall repair

4. Five details that users are most concerned about

1.Low frequency buzzing sound at night: Mostly caused by the resonance of the compressor, it is recommended to install a shock absorber.

2.New air conditioner is noisy: There may be improper installation. You can request after-sales re-commissioning within 48 hours.

3.intermittent gurgling sound: Usually the condensate water is not drained smoothly. Check the slope of the drain pipe.

4.high frequency harsh noise: Typical symptoms of motor bearing damage, which must be stopped immediately and reported for repair.

5.Remote control adjustment is invalid: Some models need to enter engineering mode to adjust the fan speed.

5. Professional advice

1.Buying Tips: Pay attention to the noise value (dB) on the product nameplate. For bedroom use, it is recommended to be ≤40dB.

2.Maintenance cycle: Professional deep cleaning is required before use every year, which can reduce operating noise by 30%.

3.Intelligent detection: Some brand APPs support the abnormal noise alarm function and it is recommended to turn it on.

From the above analysis, it can be seen that the problem of air conditioning noise needs to be dealt with in a targeted manner based on specific symptoms. If the problem remains unresolved after self-examination, it is recommended to make an appointment for inspection through official channels to avoid secondary damage caused by unprofessional repairs. During the peak maintenance season in summer, reservations usually need to be made 3 days in advance, so please arrange your time accordingly.

Next article
  • What is series resonance?In electronic engineering and power systems,series resonanceIt is an important concept that describes the special phenomena that occur in a circuit at a specific frequency. This article will introduce the definition, principle, characteristics and application scenarios of series resonance in detail, and combine it with the hot topics and hot content on the entire network in the past 10 days t
    2026-01-25 mechanical
  • Why do wires need to be passed through tubes?In modern construction and home decoration, wire routing is a common construction step. Although many people may be confused by this practice, electrical conduits actually serve multiple important functions, including safety protection, ease of repair, and compliance with code requirements. This article will discuss in detail the reasons why wires pass through conduits, an
    2026-01-23 mechanical
  • What is PCB impositionPCB panelization is a key technology in the printed circuit board (PCB) manufacturing process. It refers to the rational arrangement and combination of multiple identical or different PCB designs on a large board to improve production efficiency, reduce costs and facilitate subsequent assembly. Imposition is particularly common in mass production and is widely used in consumer electronics, autom
    2026-01-20 mechanical
  • Title: What does the number 614 mean?In the Internet age, numbers are often given special meanings and become part of online popular culture. The number "614" has attracted a lot of attention recently, with many people wondering what it actually represents. This article will analyze the meaning of "614" based on hot topics and hot content on the Internet in the past 10 days, and compile relevant data for readers' ref
    2026-01-18 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line